0

    Products

    Shaped refractory products (selection).

    Products from the EU


    Chrome ore free basic bricks

    ALMAG® ES

    magnesia-spinel
    For upper and lower transition zones, chrome-free for a reduced shell temperature

    ALMAG® AF

    magnesia-fused spinel
    upper and lower transition zones subject to ­extremely high thermo­chemical load in kilns using alternative fuels, ­chrome ore free

    ALMAG® CF

    magnesia spinel (fMA spinel)
    Upper and lower transition zones subjected to extremely high thermochemical stresses when using alternative fuels and/or raw materials; optimized coatability, high hot strength, high mechanical flexibility, chrome-free

    TOPMAG® AF

    magnesia-fused spinel
    upper and lower transition zones subject to high thermochemical load in kilns using alternative fuels, chrome ore free

    TOPMAG® CF

    magnesia spinel (fMA spinel)
    Upper and lower transition zones subjected to high thermochemical stresses when using alternative fuels and/or raw materials; optimized coatability, increased thermoplasticity, high mechanical flexibility, chrome-free

    ALMAG® A1

    magnesia-fused spinel
    upper transition zone, tyre section subject to high thermo­mechanical load with redox conditions and extreme alkali and ­sulphate attack, chrome ore free

    TOPMAG® A1

    magnesia-fused spinel
    upper transition zone, tyre section subject to high mechanical load with redox ­conditions and extreme alkali attack, chrome ore free

    ALMAG® 85

    magnesia-spinel
    upper and lower transition zones ­sub­ject to severe ­service conditions with alkali attack and redox conditions, chrome ore free

    REFRAMAG® AF

    magnesia-spinel
    upper and lower ­transition zones as well as burning zone subject to ­thermochemical load in kilns using alternative fuels, chrome ore free

    REFRAMAG® CF

    magnesia spinel (fMA spinel)
    Upper and lower transition zones as well as sintering zone subjected to thermochemical stresses when using alternative fuels and/or raw materials; optimized coatability, high thermoplasticity, high mechanical flexibility, chrome-free

    PERILEX® CF

    magnesia spinel (fMA spinel)
    Upper transition zone and sintering zone subjected to thermochemical stresses when using alternative fuels and/or raw materials; optimized coatability, increased thermoplasticity, high mechanical flexibility, chrome-free

    MAGPURE® 93

    magnesia-spinel
    central burning zone in the coating area and upper ­transition zone, chrome ore free

    MAGNUM® E

    magnesia-zirconium oxide
    lower transition zone subject to extremely high thermal load with cement clinker attack and redox ­conditions; also recommended for use in lime, ­dolomite and magnesite kilns, chrome ore free

    High alumina bricks

    KRONEX® 87

    bauxite (gibbsite type)
    outlet zone, kiln hood, cooler, tertiary air duct, calciner

    KRONEX® 85

    bauxite (diaspore type)
    outlet zone, kiln hood, cooler, tertiary air duct, calciner

    KRONEX® 75

    bauxite
    safety zone, outlet zone, kiln hood, cooler, tertiary air duct, calciner

    KRONEX® 70

    bauxite
    safety zone, kiln hood, cooler, ­calciner

    REFRALUSIT® 63

    andalusite
    calciner, kiln hood, lime sludge kiln, combustion ­chamber, cooler

    REFRALUSIT® 61

    andalusite
    lime sludge kiln, combustion ­chamber

    KRONEX® 60

    bauxite, fireclay
    safety zone

    KRONEX® 50

    special high alumina fireclay
    safety zone, pre­heater, kiln hood, cooler

    Fireclay bricks

    KRONEX® 40

    special alkali resistant fireclay
    inlet zone, chain zone, preheating zone, preheater, cooler

    KRONEX® 30

    special alkali resistant fireclay
    inlet zone, chain zone, preheating zone, preheater, cooler, tertiary air duct

    KRONEX® 20

    Alkali-resistant special fireclay
    Inlet zone, preheater

    Basic bricks

    PERILEX® 83

    magnesia-chromite
    burning zone as well as upper and lower transition zones subject to severe ­ser­vice conditions, low chrome ore ­content

    PERILEX® 80

    magnesia-chromite
    burning zone as well as upper and lower transition zones sub­ject to normal service conditions, low ­chrome ore ­content

    Special application bricks

    REFRATHERM® 150

    refractory light weight materials
    preheating zone, lime sludge kiln

    KRONAL® 63 AR

    mullitizised raw material, silicon carbide
    kiln outlet, cooler inlet

    KRONAL® 60 AR

    andalusite, silicon carbide
    safety zone subject to high alkali load and increased temperature, preheater, kiln hood, cooler

    KRONAL® 50 AR

    special high ­alumina ­fireclay, silicon carbide
    safety zone subject to high alkali load, preheater, kiln hood, cooler

    Products from Asia



    Basic bricks

    TOPMAG® A1

    magnesia-fused spinel
    upper transition zone, tyre section subject to high mechanical load with redox ­conditions and extreme alkali attack, chrome ore free

    TOPMAG® AF

    magnesia-fused spinel
    upper and lower transition zones subject to high thermochemical load in kilns using alternative fuels, chrome ore free

    TOPMAG® TR

    ideally combines the excellent AF properties of the TOPMAG® AF with the outstanding structural elasticity of the TOPMAG® A1. Developed to withstand the increased thermochemical and mechanical stresses of the upper and lower transition zones.

    REFRAMAG® S

    magnesia spinel
    Features the typical AF properties such as low porosity and high strength

    PLEOMAG 90

    Magnesia brick, elastified with fused pleonaste, exhibits excellent coatability, combined with high structural elasticity.

    FERROMAG® S

    magnesia pleonaste
    normal thermochemical stress in sintering zone, promotes coating, chrome-free

    Alumina bricks

    RA SIC T

    bauxite silicon carbide
    thermochemically highly stressed safety zone, kiln outlet, kiln hood, calciner, cooler

    RA 60 T

    mullite silicon carbide
    chemically stressed calcining and safety zones, calciner, tertiary air duct, cooler

    RA 40 T

    alkali-resistant special fireclay
    inlet zone, preheating zone, preheater, cooler, tertiary air duct.

    RA 35 T

    alkali-resistant special fireclay
    preheater, tertiary air duct
    Follow us!
    Privacy settings
    This website uses cookies and techniques of external service providers. Some of them are necessary, and others help us to improve this website and your experience of it. These techniques can collect personal data. Here, we want to give you the opportunity to decide yourself which services/providers may collect your data. You can change/revoke your selection at any time later on our data protection page in the form provided there.