Pulp & paper
Products (selection).
Shaped refractory products
ALMAG® 85
magnesia-spinel
clinkering zone
clinkering zone
MAGPURE® 93
magnesia-spinel
clinkering zone
clinkering zone
REFRALUSIT® 63
andalusite
clinkering zone
clinkering zone
KRONEX® 30
alkali-resistant special fireclay
kiln inlet zone
kiln inlet zone
KRONEX® 50
special alumina-rich fireclay
lifter zone, preheating zone
lifter zone, preheating zone
KRONEX® 85
bauxite (diaspore type)
discharge zone, kiln hood, cooler, tertiary air duct, calciner
discharge zone, kiln hood, cooler, tertiary air duct, calciner
KRONEX® 87
bauxite (gibbsite type)
discharge zone, kiln hood, cooler, tertiary air duct, calciner
discharge zone, kiln hood, cooler, tertiary air duct, calciner
REFRALUSIT® 61
andalusite
lime sludge kiln, combustion chamber
lime sludge kiln, combustion chamber
PERILEX® CF
magnesia-spinel (fMA spinel)
upper transition zone and sintering zone subjected to thermochemical stresses when using alternative fuels and/or raw materials; optimized coatability, increased thermoplasticity, high mechanical flexibility, chrome-free
upper transition zone and sintering zone subjected to thermochemical stresses when using alternative fuels and/or raw materials; optimized coatability, increased thermoplasticity, high mechanical flexibility, chrome-free
REFRAMAG® AF
magnesia spinel
thermochemically stressed lower and upper transition zones as well as the sintering zone when using alternative fuels, chrome-free
thermochemically stressed lower and upper transition zones as well as the sintering zone when using alternative fuels, chrome-free
REFRAMAG® 85
magnesia spinel
combustion zone, chrome-free
combustion zone, chrome-free
TOPMAG® AF
magnesia-fused spinel
thermochemically highly stressed lower and upper transition zones when using alternative fuels, chrome-free
thermochemically highly stressed lower and upper transition zones when using alternative fuels, chrome-free
ALMAG® ES
magnesia spinel
combustion zone, chrome-free for a reduced shell temperature
combustion zone, chrome-free for a reduced shell temperature
KRONEX® 40
alkali-resistant special fireclay
inlet zone, chain zone, preheating zone, preheater, cooler
inlet zone, chain zone, preheating zone, preheater, cooler
KRONEX® 20
alkali-resistant special fireclay
inlet zone, preheater
inlet zone, preheater
REFRATHERM® 150
kiln inlet zone, backup insulation
Unshaped products
Type | Application areas | Material properties |
---|---|---|
Kieselgur Extra-E | Backup insulation | Highly insulating |
REFRAMULLITE 60 LCC | Discharge zone, kiln hood | High abrasion resistance and strength, good resistance to alkali attack |
REFRAMULLITE 60 LCG | Discharge zone, kiln hood | High resistance against alkali, attack, very good thermal and mechanical resistance, high thermal strength, low sensitivity to stress |
REFRAMULLITE 63 ED | Discharge zone, kiln hood | Single-component system, cement-free, shorter drying and heating up times, good alkali resistance, high thermomechanical resistance, very low sensitivity to stress |
REFRAMULLITE 63 JC | Discharge zone, kiln hood | Resistant against alkali attack, very high refractoriness, high thermal shock resistance |
REFRACLAY 25 | Lifter zone, kiln inlet zone, drywall | Very high resistance against alkali, chloride, and sulphur attack |
REFRACLAY 25 MCG | Lifter zone, kiln inlet zone, drywall | Very high resistance against alkali, chloride, and sulphur attack |
REFRACLAY 25 JC | Lifter zone, kiln inlet zone, drywall | Very high resistance against alkali, chloride, and sulphur attack |
REFRACLAY 40 LCC | Lifter zone, kiln inlet zone, drywall | High resistance against alkali attack and abrasion |
REFRACLAY 40 LCG | Lifter zone, kiln inlet zone, drywall | Very high resistance against alkali, chloride, and sulphur attack, good thermal resistance, high bending strength, and good mechanical resistance |
REFRACLAY 40 JC | Lifter zone, kiln inlet zone, drywall | Resistant against alkali attack and abrasion |
LCC | Low Cement Castable |
ED | Easy Dry |
JC | REFRA JETCRETE® (wet gunning), special gunning equipment required, also free-flowing or suitable for vibration |
LCG | Low Cement Gunning (dry gunning) |
MCG | Medium Cement Gunning (dry gunning) |