Pulp & paper

Products (selection).


Shaped refractory products

ALMAG® 85

magnesia-spinel
clinkering zone

MAGPURE® 93

magnesia-spinel
clinkering zone

REFRALUSIT® 63

andalusite
clinkering zone

KRONEX® 30

alkali-resistant special fireclay
kiln inlet zone

KRONEX® 50

special alumina-rich fireclay
lifter zone, preheating zone

KRONEX® 85

bauxite (diaspore type)
discharge zone, kiln hood, cooler, tertiary air duct, calciner

KRONEX® 87

bauxite (gibbsite type)
discharge zone, kiln hood, cooler, tertiary air duct, calciner

REFRALUSIT® 61

andalusite
lime sludge kiln, combustion chamber

PERILEX® CF

magnesia-spinel (fMA spinel)
upper transition zone and sintering zone subjected to thermochemical stresses when using alternative fuels and/or raw materials; optimized coatability, increased thermoplasticity, high mechanical flexibility, chrome-free

REFRAMAG® AF

magnesia spinel
thermochemically stressed lower and upper transition zones as well as the sintering zone when using alternative fuels, chrome-free

REFRAMAG® 85

magnesia spinel
combustion zone, chrome-free

TOPMAG® AF

magnesia-fused spinel
thermochemically highly stressed lower and upper transition zones when using alternative fuels, chrome-free

ALMAG® ES

magnesia spinel
combustion zone, chrome-free for a reduced shell temperature

KRONEX® 40

alkali-resistant special fireclay
inlet zone, chain zone, preheating zone, preheater, cooler

KRONEX® 20

alkali-resistant special fireclay
inlet zone, preheater

REFRATHERM® 150

kiln inlet zone, backup insulation

Unshaped products

Type Application areas Material properties
Kieselgur Extra-E Backup insulation Highly insulating
REFRAMULLITE 60 LCC Discharge zone, kiln hood High abrasion resistance and strength, good resistance to alkali attack
REFRAMULLITE 60 LCG Discharge zone, kiln hood High resistance against alkali, attack, very good thermal and mechanical resistance, high thermal strength, low sensitivity to stress
REFRAMULLITE 63 ED Discharge zone, kiln hood Single-component system, cement-free, shorter drying and heating up times, good alkali resistance, high thermomechanical resistance, very low sensitivity to stress
REFRAMULLITE 63 JC Discharge zone, kiln hood Resistant against alkali attack, very high refractoriness, high thermal shock resistance
REFRACLAY 25 Lifter zone, kiln inlet zone, drywall Very high resistance against alkali, chloride, and sulphur attack
REFRACLAY 25 MCG Lifter zone, kiln inlet zone, drywall Very high resistance against alkali, chloride, and sulphur attack
REFRACLAY 25 JC Lifter zone, kiln inlet zone, drywall Very high resistance against alkali, chloride, and sulphur attack
REFRACLAY 40 LCC Lifter zone, kiln inlet zone, drywall High resistance against alkali attack and abrasion
REFRACLAY 40 LCG Lifter zone, kiln inlet zone, drywall Very high resistance against alkali, chloride, and sulphur attack, good thermal resistance, high bending strength, and good mechanical resistance
REFRACLAY 40 JC Lifter zone, kiln inlet zone, drywall Resistant against alkali attack and abrasion
LCCLow Cement Castable
EDEasy Dry
JCREFRA JETCRETE® (wet gunning), special gunning equipment required, also free-flowing or suitable for vibration
LCGLow Cement Gunning (dry gunning)
MCGMedium Cement Gunning (dry gunning)
© 2018 Refratechnik. All rights reserved

Contents Legal notice Privacy statement